Flow of oil | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Flow of oil in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
23
Hi there
Just a quick question how much oil flow do you have from a oil flexi disconnected from a oil pump .which is supplied from a full tank which has a tiger loop on it .I have a trickle .should I expect more ????
 
Is there any head of oil at the Tigerloop level, or is the oil tank/oil level a lot lower than boiler, hence the Tigerloop?
I would prefer to check the oil flow at copper pipe before where it joins to Tigerloop. (Where that is possible if it has a head of oil)
Obviously any filters and valves and fittings need to be clean, but I come across loads of oil lines that have only a trickle of flow and I usually can't find why. Can be the oil pipe crushed somewhere. As long as the flow stays constant, then a steady trickle usually good enough supply for a domestic boiler.
 
Plenty head on tiger loop .have a reillo rdb 1 keeps going to lock out .fan runs and keeps cutting in on oil pressure buts stops and goes to lock out .checked photo cell , solenoid , motor and now oil line ?? But only got a trickle .as other bolero I have a good flow .does tiger loop restrict flow to a trickle ???
 
Flow should be reasonable out of feed hose from Tigerloop.
Tigerloops can give trouble, although rarely and make it appear oil pump not working.
Control box could have fault, but I would always first think oil pump. Did you check oil pump?
Putting a gauge on the oil pump will not always prove much. Riello oil pumps break at the drive pin to gear, if you ever opened any that were faulty.
Hope bypass screw is fitted in oil pump. Check also that no air leaks in oil line, or hoses
 
Last edited:
Yeah hardly have any flow at burner flow from tiger loop .recently ran out of oil .and topped up .but what I don't get as if I disconnect photocell it fires up quickly and goes to lock out .but if got photo cell plugged in it just runs the fans ??
 
Maybe faulty photocell then.

Yes. The very first and easiest thing to check is to see if the photocell has dirt/soot on the front of it. It might be clean and faulty but worth a quick look.
 
Maybe faulty photocell then.

Yes. The very first and easiest thing to check is to see if the photocell has dirt/soot on the front of it. It might be clean and faulty but worth a quick look.
 
Status
Not open for further replies.

Similar plumbing topics

How far did you strip pump down? No filter on...
Replies
6
Views
879
hi, no current pipework in concrete i believe...
Replies
7
Views
1K
Thanks much appreciated , yes those isolation...
Replies
2
Views
772
    • Funny
Polite reply here, but firstly stating the...
Replies
17
Views
2K
Replies
9
Views
943
Back
Top