Flue liner on gas Aga. | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Flue liner on gas Aga. in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
D

Dsgas

ImageUploadedByTapatalk1377255682.751688.jpg

Check this out! Poor flue flow and flame lift on burner lighting.
 
In old farmhouse. I put this on here and not the private forum so the public can see it and get their appliances serviced properly. I'm sick of coming across this crap, I've got a sore head and its friday!
 
do people tell the owners flues need sweeping! anyway thats clean compared to sooted up oil AGAs
 
Last edited by a moderator:
What's the white stuff? Looked like cavity wall stuff , seen a few bf floor standees and chimneys with that recycled paper type insulation in them before.
 
Never said anything about flue cleaning. Serviced properly. Bp 5 Mb under what it should be, flue liner running horizontally, 2 90 degree bends in it, no insulation at base of flue, crows nest next to flue liner, thermostat knackered.
 
What's the white stuff? Looked like cavity wall stuff , seen a few bf floor standees and chimneys with that recycled paper type insulation in them before.

Doh! Zoomed in its dust and lint? Not much soot though?!
 
Nah no soot flame picture was ok at 10 mb but bump it to correct 15mb and it was yellow and all over the shop. Engineer b4 prob left it as it worked but was underfiring. Customer was complaining about temp not getting up quick enough. Stat was knackered but it wouldn't have helped anyway.
 
Never said anything about flue cleaning. Serviced properly. Bp 5 Mb under what it should be, flue liner running horizontally, 2 90 degree bends in it, no insulation at base of flue, crows nest next to flue liner, thermostat knackered.

surely part of your service routine is to ensure the custard gets their flue swept if its like this and the cause of the problem here is poor flue design exacurbated by poor servicing in the past.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Let them supply and fit , then it’s their...
Replies
3
Views
672
I’ll make one, it’s basically only two bits of...
Replies
7
Views
913
Thank you for keeping me safe. If it is the...
Replies
2
Views
574
I have a portable gas fire which keeps...
Replies
0
Views
499
Back
Top