Flue termination distance

[JTplumbingservices]

I’m going to be moving a Vokera Unica i32 on Monday.
I had a quick look at the building while driving past and it looks like the steel gas service pipe running externally to the flat above is where the flue would come out so I’ll have to re direct it a bit.
I was looking at BS 5440 and can’t see termination clearances for that in the list.
Can anyone point me in the direction of where it states this ?
Cheers

 

[firemant]

You mean distance from a steel gas pipe?

 

[JTplumbingservices]

You mean distance from a steel gas pipe?
[/QUOTE
Yes, can’t find it in the BS

You mean distance from a steel gas pipe?

yes, I can’t see it in the BS

 

[firemant]

Because it isn't there. Don't worry about it.

What is your actual concern?

 

[JTplumbingservices]

Because it isn't there. Don't worry about it.

What is your actual concern?

That there was a reg on it I wasn’t aware of

 

[ShaunCorbs]

TBH 25-50mm is good enough what you don’t want is it below the flue really

 

[JTplumbingservices]

TBH 25-50mm is good enough what you don’t want is it below the flue really

It will run past my flue vertically to the side of it

 

[ShaunCorbs]

It will run past my flue vertically to the side of it

That’s fine I would say so min 25mm