Flush cleaning only half the bowl

[Rae2005]

Hi,
I have a newly installed toilet but the flush only pushes water around half of the toilet bowl, no water gets to the front. Is the an issue with the toilet, cistern or pressure (water pressure in house is good)? And how can I get this issue fixed?
Many thanks

 

[king of pipes]

Did you supply the toilet internet ? Or bought locally

 

[centralheatking]

Check water level in cistern make sure its at the top. Put spirit level on the pan...accross and ft to back. There are some designer pans that are not fit for purpose and are bluntly insanitary. centralheatking

 

[SimonG]

Adjust amount of water on the flush. Amazing how many are fitted and not adjusted for optimal flush.

 

[townfanjon]

Assuming the cistern is full and there are no blockages I would say it was the pan itself ,
Victorian Plumbing by any chance ??

 

[king of pipes]

Post a picture up and let us have a look ? At the cistern internals

 

[oz-plumber]

It must be an installation issue....
...no manufacturer or supplier would introduce into the market a pan that doesn't flush properly... everything is tested prior to release onto the market...

These are some of the things a rep said to me when we installed 4 designer pans at a property that had a flushing issue.

We ended up replacing the pans due to non flush issues

 

[townfanjon]

It must be an installation issue..

You aught to see what ***** comes through the internet over here Oz

 

[Rae2005]

Did you supply the toilet internet ? Or bought locally

Hi
Bought locally, it's a phoenix toilet.

Assuming the cistern is full and there are no blockages I would say it was the pan itself ,
Victorian Plumbing by any chance ??

Hi it's a phoenix toilet, it's not a designer toilet.
Thanks

 

[Best]

Was any jointing putty (Plumbers Mait) used between pan and cistern?