Flush pipe seal | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Flush pipe seal in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

Birtie

I am new to this forum, I hope somebody can help. I have had to change the siphon in a non close coupled WC. Obviously this required the removal of the system from the pan. The problem I have is that the seal between the flush pipe and the pan needs to be replaced and I cannot find one the same size. It is rubber 2” ID 2 3/4 “OD. I have tried the usual places Plumb centre etc and they only have smaller sizes. Can anybody tell me where I can get a new seal?

 
Have come across this size flush pipe with concealed cisterns by,I believe,made by Velleroy Boch

Think other German manufactorers also have 2" fliush pipes

Thus flush cone size you are looking for
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
I think you'll find it is made from 'high...
Replies
7
Views
589
  • Question
Flush cone too far up the pipe. When flushing...
Replies
15
Views
2K
Or raise the cistern
Replies
2
Views
702
The latest Geberit flush valves have an...
Replies
3
Views
674
  • Question
Not designed for the trap upto you in the end...
Replies
3
Views
615
Back
Top