FOR SALE - REMS Amigo electric pipe threader

[Masood]

Almost brand new, 240V hand held electric pipe threader.

Complete with clamp and 4 dies - 1/2", 3/4", 1" and 1 1/4"

Only one of the dies has ever been used - the 3/4" one has cut around 7 or 8 threads and is still pristine. The other three are brand new. Bought for a job that was re-specced to pressfit.

Costs £640 inc VAT new: http://www.pipetoolsdirect.co.uk/shop/Rems-530020-Amigo-Set-R.html

Looking for £400 or near offer.

Pictures:

 

[ShaunCorbs]

Pitty it wasn't 110v would of had it else price is about right

 

[Chalked]

Looks on excellent condition.
All my dies have marks around the edge, where I tap it with a hammer, to shake out the swarf while threading and so it doesn't rip the threads off when reversing.

Am I the only person to do this??!

 

[Chalked]

Looks on excellent condition.
All my dies have marks around the edge, where I tap it with a hammer, to shake out the swarf while threading and so it doesn't rip the threads off when reversing.

Am I the only person to do this??!

 

[ShaunCorbs]

Looks on excellent condition.
All my dies have marks around the edge, where I tap it with a hammer, to shake out the swarf while threading and so it doesn't rip the threads off when reversing.

Am I the only person to do this??!

I use an artist brush (about 10mm brush) to brush the chips out

 

[Chalked]

Your posh Shaun!

 

[turnpin]

How's the training going Masood.......regards Turnpin

 

[ShaunCorbs]

Your posh Shaun!

your local school should have plenty

 

[Masood]

How's the training going Masood.......regards Turnpin

Good mate. A LOT to take in but it's a really nice team here..

 

[Masood]

How's the training going Masood.......regards Turnpin

Good mate. A LOT to take in but it's a really nice team here..

 

[zzzjim]

........

Am I the only person to do this??!

Thinks Hardened steel on hardened steel .... not ideal

plenty of lube just makes a mess !

 

[zzzjim]

...

 

[newcastle phill]

Bet this weighs a ton ?.
How much to post and whereabouts are you ?

 

[Dannypipe]

Will you be able to provide a VAT receipt Mas?

Interested.

 

[Masood]

Bet this weighs a ton ?.
How much to post and whereabouts are you ?

Sorry mate, I thought this thread had died! Haven't been checking it. I can weigh it over the weekend and get a price from My Hermes if you're interested?

 

[Masood]

Bet this weighs a ton ?.
How much to post and whereabouts are you ?

Sorry mate, I thought this thread had died! Haven't been checking it. I can weigh it over the weekend and get a price from My Hermes if you're interested?

 

[Masood]

Will you be able to provide a VAT receipt Mas?

Interested.

I can provide a receipt Dan but I'm not VAT registered so it won't be a VAT receipt...

 

[newcastle phill]

Yes massod - do that old bean

 

[Masood]

Yes massod - do that old bean

Hi Phil, we're looking at about £39 for Parcelforce 48 hour tracked delivery, insured to £500. Happy to negotiate on splitting postage cost or adjusting selling price if you're interested...

 

[Masood]

Yes massod - do that old bean

Hi Phil, we're looking at about £39 for Parcelforce 48 hour tracked delivery, insured to £500. Happy to negotiate on splitting postage cost or adjusting selling price if you're interested...

 

[Old Account]

Hi Mas,

Any more tools you are selling just wondering if you are going to sell few more as you have changed your work.

 

[Old Account]

Hi Mas,

Any more tools you are selling just wondering if you are going to sell few more as you have changed your work.

 

[joni os]

Hi Mas,

Any more tools you are selling just wondering if you are going to sell few more as you have changed your work.

Changing work may be an opportunity, but Knowledge, Skill and Tools will put bread on the table what ever the future may hold. Money could not compensate me for the bereavement felt at the loss of a bahco or match the joyful reunion.

 

[Masood]

Hi Mas,

Any more tools you are selling just wondering if you are going to sell few more as you have changed your work.

Pipe threader as above, powerflush machine, FGA, loads of stock - tube, fittings, traps, taps, maybe some power tools as well. Decisions as to what I'm keeping and what I'm selling will be made around end March/early April...

 

[Masood]

Hi Mas,

Any more tools you are selling just wondering if you are going to sell few more as you have changed your work.

Pipe threader as above, powerflush machine, FGA, loads of stock - tube, fittings, traps, taps, maybe some power tools as well. Decisions as to what I'm keeping and what I'm selling will be made around end March/early April...