Fortic/combination hot water cylinders | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Fortic/combination hot water cylinders in the Bathroom Advice area at Plumbers Forums

bewsh

Plumbers Arms member
Plumber
Gas Engineer
Messages
608
I've been to a job with a leaky cylinder, drained it all down and now need to replace like for like.

Looking on plumb center website, it says 900x450, is 900 the height of the entire unit or just the hot water storage part (not including the cold water storage on top)?

Probably a stupid question, but can't say I've ever ordered one of these, and they don't seem too cheap!
 
900 is the height of the entire unit

[DLMURL="http://www.tradeonlyplumbing.co.uk/heating-hot-water/cylinders-cws-tanks/open-vented-cylinders/copper-cylinders/900-x-450-dircombi-cylpart-l.html"]900 X 450 Direct Combi Cylinder Part L - Copper Cylinders - Open Vented Cylinders - Cylinders, CWS Tanks & Electric Heaters - Heating & Hot Water | Trade Only Plumbing & Heating Supplies[/DLMURL]
 
Last edited by a moderator:

Similar plumbing topics

  • Question
Ya, they said the fact the anti-vibration...
Replies
6
Views
725
  • Question
Hi Murdoch, Thanks for your recommendation...
Replies
2
Views
1K
  • Question
The basin & bathtaps will be pretty old to be...
Replies
14
Views
2K
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
1K
Back
Top