From another forum pistonheads | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss From another forum pistonheads in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,128
Hi all,

My combi boiler has a plastic vent pipe (I assume!) that comes out the top of the boiler, through the attic and out of the roof.

I've been thinking about fitting an extractor fan / light all in one unit above the shower and was considering mounting the exhaust from the extractor fan to the vent pipe for the boiler. That way there's only one hole through the roof, and the plastic piping for the boiler is all push fit / screwed together stuff.

Any downsides to this?
 
What's the replys
 
You will die
Dont do it
etc
etc
Think he has got the point:)
 
Status
Not open for further replies.

Similar plumbing topics

T
What does your building control officer say?
Replies
2
Views
793
Murdoch
M
No problem with the 900mm from openings as it...
Replies
4
Views
369
I took those photos! Looks like the only...
Replies
9
Views
2K
OK, but from the boiler it should be Vent then...
Replies
16
Views
2K
  • Question
Also I don't think he'll be able to get a bit...
Replies
12
Views
2K
Back
Top