Fuel pump voltage at 80volts | Oil and Solid Fuel Forum | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Fuel pump voltage at 80volts

Post thread
Post reply

Discuss Fuel pump voltage at 80volts in the Oil and Solid Fuel Forum area at Plumbers Forums

D

Dave hall

Hi, just fitted a new fuel pump and control unit to my ecotherm boiler but I still can’t get any fuel to the top of the pump, nothing coming out of the bleed screw but definitely fuel in the bottom of the pump. I checked the voltage to the pump and it’s only 80volts but there is 240volts going into the control unit.
Any ideas
 

Similar plumbing topics

Atkinson Equipment Ltd
Atkinson Tanktop general info & service advice
I've tidied up this thread and banned a user...
Replies
2
Views
729
Dan
Dan
J
Cant adjust Danfoss pressure am I using correct ports?
Thanks yes I'll try that tomorrow I discovered...
Replies
2
Views
575
JC22024
J
S
Trianco burner locking out
Coil.......................................plus...
Replies
1
Views
839
SimonG
SimonG
J
Trianco Eurostar 50 - 60 (S) oil burner riello motor problem
All sorted now and running better than ever...
Replies
3
Views
1K
Jacey96
J
O
HRM Starflow 50/85 won't fire up, serial no 1099/50/299
Wait until you can get hold of somebody with...
Replies
4
Views
920
SimonG
SimonG
Back
Top