Gas appliances manuals | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Gas appliances manuals in the Gas Engineers Forum area at Plumbers Forums

kasser

Gas Engineer
Messages
237
Am I the only one struggling to find appliances' manuals online? I know it's hard enough with cookers and old gas fires but I've just been unable to find the manual for an Ideal Exclusive. I thought I had found it but it turns out the GC number was different.

Given the law says "refer to MI" and that an appliance cannot be installed without its manual, etc, shouldn't the law also hold those manufacturers responsible to provide their installation manuals for ALL their appliances? I don't think I'm the first person to think that?

If these manuals were all made available in the same single place online, say Gas Safe, then there would be no need to hunt for them all over the net and save us gas engineers a lot of time in the process. At the moment you're more likely to find your manual on manualslib.com.

It really annoys me that the industry is banging on about net zero and all that but cannot get the basics right.
 
What’s the gc number of the manual you require?
 
47-349-62
I'm not after this anymore as the job is done and I half wish you can't find it given the effort I put into finding it myself!
IMG_20231207_124107.jpg
 
Ahhh that one it’s a nope from me failed before on that one and used the first gen one as it’s the same horrible little boilers if your replacing the sump
 

Similar plumbing topics

First thank you for your fast response. We use...
Replies
3
Views
741
  • Locked
Still being called spammy by the forum filters...
Replies
8
Views
1K
More than fine then in 11/5 tube should be...
Replies
3
Views
669
What about a metal blanking plate?
Replies
5
Views
846
Back
Top