Gas fire coals | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Gas fire coals in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
E

efficient

Hi Guys, done a landlord safety check yesterday which involved a gas inset fire.
Now the fire had coals missing and the ones there weren't placed correctly. i classed this as AR and made safe... but should it of been ID?
 
an appliance is only ID if yuo are in immenent danger of dying or being injured, were you? if so ID or due to the fact that the coals were not placed properly/were missing was there a potential for a problem? is so AR, if it passed a spillage test and flame picture was fine then AR
 
Seen a few fires that were thick with soot due to missing coals so ID'd. But, as kirkgas mentioned as long as spill, flame pict ok and no signs very poor combustion then AR would be correct.
 
Status
Not open for further replies.

Similar plumbing topics

Ahhh that one it’s a nope from me failed...
Replies
4
Views
735
Yes from me also. Sorry to say. Have you got a...
Replies
2
Views
4K
Hi Willum, Gas Rating calc. Ensure no other...
Replies
6
Views
2K
Yes, all that was in place. Just had no idea...
Replies
7
Views
207
Back
Top