gas hob clearance | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss gas hob clearance in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
B

buckley plumb

been a while since I fitted a hob so dug out my viper book it shows hob 300mm from adjacent cupboard or surface also shows shaded area and shows 50mm either side of hob . does this mean the hob can only be fitted 300mm from a wall either to left or right of hob or can it go 50mm from wall .it shows diagram but no description
 
50mm from the hob to the back ie tlies etc, i think 300mm either side
 
Last edited by a moderator:
300mm from a unit, 50mm from the worktop which is accounted for in the hob itself yet to see one that isn't!
 
from memory i think its 300mm above and to each side for wall units and 50mm from the hob to the back ie tlies etc, i think 300mm either side
picture shows the 50mm to side and the 300mm tried to post pic but wont upload
 
picture shows the 50mm to side and the 300mm tried to post pic but wont upload

50mm to the side sounds a bit close to a unit. especially if theres abig pan on diverting the heat sideways....
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

Experience tells me 10mm won't be enough but...
Replies
5
Views
844
What about a metal blanking plate?
Replies
5
Views
858
I saw him change jets over but how he knew...
Replies
5
Views
1K
Yeah sorry, crappy powerpoint skills rather...
Replies
4
Views
3K
Back
Top