Gas hob installation query?

[macka09]

I don’t normally fit hobs or do much gas install work but im installing a gas hob. Am I right in saying it’s just a gas rate of the appliance and check working pressures?

 

[Scott_D]

Flame picture
Clearances
Ventilation
Safety devices

 

[Harvest Fields]

As above

 

[townfanjon]

Dont forget a gas cock , waste of bloody time though .

 

[Harvest Fields]

Dont forget a gas cock , waste of bloody time though .

Let’s not start that again Town.

 

[macka09]

Dont forget a gas cock , waste of bloody time though .

This you mean?

 

[macka09]

Flame picture. No yellow or wavy flames?
Clearances. Check mis?
Ventilation. Openable window or door?
Safety devices???

 

[townfanjon]

This you mean?

View attachment 37354

Yes, but not much use when you have to pull the cooker out to turn the hob off lol

 

[Scott_D]

I like the gas ISO’s with test point from Screwfix for hobs

Check FFds are working
Clearances from units etc

 

[macka09]

I like the gas ISO’s with test point from Screwfix for hobs

Check FFds are working
Clearances from units etc

I didn’t think a hob had an ffd? Or am I being stupid?

 

[Scott_D]

I didn’t think a hob had an ffd? Or am I being stupid?

Most new ones do
Must have one if it’s fiats

 

[Aire]

Most new ones do
Must have one if it’s fiats

Why would you have a hob in a car?

 

[Harvest Fields]

Why would you have a hob in a car?

I thought that but couldn’t be bothered to correct him.

 

[macka09]

Most new ones do
Must have one if it’s fiats

Fiats??

 

[Aire]

I didn’t think a hob had an ffd? Or am I being stupid?

Your not been stupid, most new ones do but lots of old ones don't. As above, in multi dwelling buildings, a hob must be fitted with an ffd. To test it, light the hob, blow the flame out and check the gas switches itself off, and do this for all rings.

 

[Scott_D]

Fiats??

And Citroen’s

FLATS

 

[Old Account]

Pipe work must be ridgid not with cooker hose

 

[Harvest Fields]

Only if there is an built in oven in front of it.

 

[Riley]

Pipe work must be ridgid not with cooker hose

View attachment 37378

One of yours Ron

 

[macka09]

Are the clearances above and to the back and side only for flammable materials? What about a distance at the front of the work top?

 

[ShaunCorbs]

Pipe work must be ridgid not with cooker hose

View attachment 37378

You can fit hobs on cooker hoses manufacturer instructions must say it’s acceptable and the install meets the spec

 

[Riley]

I wish they hadn’t gone down that route as some manufacturers do and some manufacturers don’t

 

[Scott_D]

Are the clearances above and to the back and side only for flammable materials? What about a distance at the front of the work top?

What have you got that’s non flammable?

 

[kozak1968]

Or listen for the click when the ring is turned off.

 

[Scott_D]

Or listen for the click when the ring is turned off.

Does the click mean it’s working?