Gas Hob | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Gas Hob in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
R

rodders

If the above clearance is 40mm short (should be clearance of 650mm but is 610mm) is this classed as NCS? Its only this one that is not to the MIs and there is no sign of scorching etc etc.

Thanks
 
If it's been fitted some time then yeh NCS! I have this over a year old rule embedded, don't know why, it just seems appropriate somehow, that goes for new kitchens too :)
 
If it's been fitted some time then yeh NCS! I have this over a year old rule embedded, don't know why, it just seems appropriate somehow, that goes for new kitchens too :)

Yeah its been in approx 5 years by the look of it, but last landlord check it had no defects so just checking. Cheers
 
If the above clearance is 40mm short (should be clearance of 650mm but is 610mm) is this classed as NCS? Its only this one that is not to the MIs and there is no sign of scorching etc etc.

Thanks
ncs AS LONG AS THERES NO SIGNS OF DISTRESS if there is AR, make sure you mark the cert ncs but NO SIGNS OF DISTRESS
 
Status
Not open for further replies.

Similar plumbing topics

Experience tells me 10mm won't be enough but...
Replies
5
Views
844
Only advise I can suggest is to contact the...
Replies
3
Views
1K
British standard is 760mm (76cm). Not heard of...
Replies
2
Views
1K
Deleted member 120897
D
What about a metal blanking plate?
Replies
5
Views
857
Back
Top