gas hob | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss gas hob in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
N

nysk2008

went to have a look at a gas hob today. flame picture slightly unstable and slight impingement on 2 of the burners - injectors clean etc and supply was fine - any ideas what else?

cheers
 
Gas rate ok ?
Flame retention holes clogged ?
 
Last edited by a moderator:
Light it and bang center of burner usually cacca poo dislodges or burns off
 
get customers tooth brush out of bathroom and give the burner alittle clean over the sink. bobs your uncle.
 
Status
Not open for further replies.

Similar plumbing topics

Experience tells me 10mm won't be enough but...
Replies
5
Views
846
As you stated: The appliance is...
Replies
5
Views
819
Thank you for keeping me safe. If it is the...
Replies
2
Views
574
When they converted to northsea gas in the...
Replies
3
Views
603
Back
Top