gas ran out now boiler wont light | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss gas ran out now boiler wont light in the Boilers area at Plumbers Forums

Status
Not open for further replies.
M

mikehayman45

Hi,I have a main combi 24 he boiler.it won't light after I ran out of gas.I have reset it but still won't work.this has happened before and my llord sent someone out and he had it going in 2mins.can't get in touch with my llord.can anyone help please? Many thanks
 
If you've a gas oven / hob try lighting that first for a few minutes before trying boiler
 
Should reset after turning and holding the knob to reset for a few seconds.
May take a few goes. Keep trying
Is that what your doing
 
Last edited by a moderator:
Pipe will be full of air as depending on pipe length you might need to reset a few times. Try this and if still persists then an engineer may be required.
 
Should reset after turning and holding the knob to reset for a few seconds.
May take a few goes. Keep trying
Is that what your doing

Hi,thanks for replying,yes I am trying to do it that way but can't afford to call some one out.
 
Check the gas meter has accepted the credit correctly, press the red button and see if it says on. If it says off you will need to reset the meter again by holding the red button.
 
Turn boiler off then straight round to reset and hold it in reset for 30 seconds . Boosh.
Are you still getting E1 33?
 
this should help the OP[video=youtube;MsZeTNqY2RM]https://www.youtube.com/watch?v=MsZeTNqY2RM[/video]
 
Status
Not open for further replies.

Similar plumbing topics

All fixed. Changing the nozzle and cleaning...
Replies
4
Views
526
Thanks for both replies - so the search is on...
Replies
2
Views
588
W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
700
If i turn the temperature dial right down on...
Replies
19
Views
1K
Unfortunately the fitting of a new Venturi did...
Replies
3
Views
549
Back
Top