gas safe registered plumbers on the forum

[REDSAW]

is it me or is there not that many gas registered plumbers on this forum who do not or decide not to join this registered forum?.

i have posted a new thread on there a few hours ago and no one has read it?.:81:

done this before and there just seems very few viewers, anyone know the member figures?.

 

[Billy Bob Bob]

lots of the guys/gals have posted threads wanting to join any i read are advised to pm admin,loads say they have but are waiting for access to the gs only forum,have you posted up something like gas safe only forum,how to get in,and then pm dan or dave to post on this forum

 

[REDSAW]

I have bonced your post gas man as dan and dave are the only ones with the powers of allowing members in.
Perhaps we should have a recruiting campaign week.lol.

 

[Dave]

I have gave loads access ... so pass on no replies..?

 

[Rickster123]

Sign me up please!

 

[Halesowen1]

And me, see website below for Gas safe details.

 

[Dannypipe]

I'll go check it now. I check all the latest posts on the main page so comment on all sections of the forum....just don't get on here as often as i used too.

 

[Dave]

You need to Pm Me with your GS details..

 

[sheff paul]

is it me or is there not that many gas registered plumbers on this forum who do not or decide not to join this registered forum?.

i have posted a new thread on there a few hours ago and no one has read it?.:81:

done this before and there just seems very few viewers, anyone know the member figures?.

I am gasafe mate,first got corgi reg in 1993, when it was voluntary

 

[stevetheplumber]

I am gasafe mate,first got corgi reg in 1993, when it was voluntary

how low is your number?

 

[Barry98]

lets not forget its also about contributions to the forum not just one post and then in

 

[gassafe]

I asked to join the Gas safe Forum, after weeks of waiting for the whole admin thing i gave up...

 

[Halesowen1]

Changed

 

[Barry98]

halesowen 1 you need to PM it to dan or dave id probably suggest you edit your post as its in an open forum for everyone to see.up to you

 

[Hardy1]

how do we join the gas safe forum ?

 

[REDSAW]

do you dye your hair scott?.

i would put your interest on this thread if you want access, then we know who is waiting to get in. along with a p.m poke to dave.

you will need to provide some personal details for verification too as we keep access tight as you may understand.

 

[fuzzy]

how low is your number?

0000000000000000000000000000000001

 

[Guest123]

What about those of us like me that are qualified in Leadwork? Can we not have a Leadworkers section on the forum?

 

[REDSAW]

What about those of us like me that are qualified in Leadwork? Can we not have a Leadworkers section on the forum?

please follow the 'dale farm' thread for skilled leadworkers.lol

 

[Halesowen1]

Redsaw that was from my previous Corgi card, I hope they keep it for the next 10 years too. Its more of the natural colouring now.

 

[stani]

I am gasafe mate,first got corgi reg in 1993, when it was voluntary

was it not longer than 18 years ago that registration was compulsory, it does seem it

 

[sheff paul]

how low is your number?

My first number was well under 2000,but i took a year off in the late 90,s,got reg again still quite a low number,left UK for 4 years in 2006 came back last year,Got gasafe and six figure number 534714.Guess its not the exclusive club it was years ago?

 

[sheff paul]

What about those of us like me that are qualified in Leadwork? Can we not have a Leadworkers section on the forum?

Did a bit of side flashing on my own gaff last month,not touched the stuff for 20 years ,it all came back to me.Biggest problem was finding a place to buy a dresser from

 

[sheff paul]

was it not longer than 18 years ago that registration was compulsory, it does seem it[/QUOTE

not sure mate,when i first took it out plenty of people worked on gas without bothering with corgi,first did ACOPS in 1992,mind you it was in the middle of a recession.Back then everyone was doing computer courses,and wearing shoulder pads