gas valve needed for neta tec

[thewall83]

anyone know where i can get a neta tec gas valve without gettin my eyes ripped out and i need it ASAP

thanks

 

[Barry98]

it should still be under its warrnaty

 

[Billy Bob Bob]

try here Boiler Spares and Boiler Parts - AK Gas or BAXI SPARES - Gas Appliance Spares (Preston) Ltd either parts are not listed but they will supply them,however pick up the phone,get a backbone play balls and demand they come and fix it if they refuse speak to a supervisor if 21 is leaving the meter and your getting 19 at the inlet i know what i would do

 

[thewall83]

it hasnt been registered with baxi

 

[Barry98]

why not ?

 

[thewall83]

fiddle job!

 

[Billy Bob Bob]

but you say in another thread baxi have been out your tale sounds odd baxi are not normally difficult in warranty and if they found 19 at the inlet like you say in another thread they would just sort it,most heat team engineers are good guys so level with us is the boiler nicked?

 

[Barry98]

sounds a bit sus to me

 

[thewall83]

no i spoke to baxi over the phone their tech help guys. i found the wps to check it wasnt my pipework that was at fault. boiler bought and paid for! ive been a gsr engineer for 7 years just did the job outside of work so didnt register it.

 

[Billy Bob Bob]

no i spoke to baxi over the phone their tech help guys. i found the wps to check it wasnt my pipework that was at fault. boiler bought and paid for! ive been a gsr engineer for 7 years just did the job outside of work so didnt register it.

so you cant register it because work owns your gsr number,your in a tight spot my friend cant you get a buddy to commission and issue a cert?

 

[marleyco]

Regarding where to get a valve, why not just goto your merchant's, sure they will get you one at trade cost, plumbcenter are promoting neta tec at mo so that means they are likely in the know