Getting the flow right… | General DIY Plumbing Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Getting the flow right… in the General DIY Plumbing Forum area at Plumbers Forums

Messages
4
Just had a lovely Viessmann 222-F installed along with a HUGE 5.5kw triple panel radiator, almost next to it, to heat three rooms knocked into one.

If I open the large rad valve enough to heat the large room (I’m guessing that) the return temp to the boiler is quite high, and the boiler is modulating down. This means the other 18 radiators, up to three floors away, are not getting enough supply.

I’ve read about zone mixers, although not confident I understand it…. So I need these?

Thanks guys :)
 
Anything extra been added when they installed the new boiler eg another pump ?
 

Similar plumbing topics

  • Question
How did you go about heating the extension in...
Replies
10
Views
4K
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
H
Hi there, thanks for your time to look at this...
Replies
0
Views
911
HRP123
H
    • Like
  • Question
Yes perhaps it has moved it. As for...
Replies
7
Views
5K
Sods law the builders have disconnected the...
Replies
7
Views
1K
Back
Top