Gledhill Sunspeed vented, indirect twin coil tank | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Gledhill Sunspeed vented, indirect twin coil tank in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
5
Hi! I'm thinking of replacing my old bare copper tank with one of these when it goes up in the loft following a conversion. I'll have a gas boiler indirectly heating it through the bottom coil and I thought it could get some help from a solar collecting plastic hose on the flat roof of the new dormer. Are these any good? What should I look out for except size?
 
Forget the solar hose, look up H2solar on the web you can get a compete kit;
1 Flat plate collector & 120 Litre cylinder deal
1 Sigurd Caliber 216 Flat plate Solar keymark certified collector10 year Manufacture guaranteeFlat plate off roof mounting kit (Rafter, Flat tile and Slate roof fixings available)120 Litre twin coil vented solar cylinder (large finned solar coil & 50mm insulation)Tiemme 4745 Dual Line Pump Station to include: Wilo 15/6 Solar Eco Pump, Flow setter, Filling connections, Isolating valves & Non return valves, Safety pressure valve (6 bar), Pressure gauge, Manual Air Stop, Insulated bodyResol DeltaSol AL controller Differential temperature controller for standard solar thermal systems. Function control, operating hours counter for the solar pump, tube collector function and heat quantity measurement. 3x sensor input ports and VBus port.
3x Temperature sensors
1x multi connector complete with auto air vent, isolator, sensor pocket and male ¾in flat faceCompression fixing kit, to include drain valve, compression elbows, straights & stop ends.18 Litre solar expansion vessel + fixing kit10m High temperature armaflex 15mm x 19mm pipe insulation1x 10 Litres pre-mixed heat transfer fluid fpd1120 bundle price £1228.51

And the solar uses the bottom coil as above.
 
Great, really comprehensive, thanks, but i'm watching the Gledhill for 50 quid on ebay at the moment and was going to make my own heat collector, not pay someone 1200 quid. Will have a look and cost it out though. 120lt tank a bit small too.
 
Status
Not open for further replies.

Similar plumbing topics

It doesn’t mean you will have lower temps. It...
Replies
4
Views
3K
Working at a flow temp of 30 ? As a dt of 30...
Replies
6
Views
4K
  • Question
Scotland dude we dont pay for water like the...
Replies
5
Views
1K
Why are you feeding the F&E from the CWSC...
Replies
16
Views
3K
Don't think that M.valves will pull in air...
Replies
17
Views
4K
Back
Top