Glow worm Betacom 24C Flame Failure Problem

[Jayk9001]

Hi All,

Been through the older posts but not found what I hoped for.

Been out to Betacom 24C with a flame failure fault.

Disconnected condensate sensor (condensate is clear
Changed ionisation probe
Changed main PCB board
Checked earthing

Still no joy. Still shows flame failure fault.

Any ideas? Please don't suggest I change the boiler, all faults are solvable. Technical don't know what else to suggest

Cheers

 

[PlumbBobBob]

are you gas safe? if so get your posts up to ten and send a pm to gas man or redsaw with your details to gain admittance to the private gas forum where gas matters are discussed out of public view.