Glow worm betacom 24C low pressure | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Glow worm betacom 24C low pressure in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
G

Gbo

Hi there,
I have this problem which valve i need to turn what direction? Husband away, and no heating and hot water suddeenly on saturday evening.:mad: pleaase help, thank you WP_20151121_003-2.jpg
 
anything in the cupboard below?

silver flex with a valve either side?
 
Oh dear, yes a mouse in that cupboard I cant open it, I am serious

can you remember any silver flex / could you see any pipework??
 
They're only small don't worry, unless it's a hippopotomouse:smoking:
Seriously though, take a pic under the boiler
 
Oh dear, yes a mouse in that cupboard I cant open it, I am serious

Shut your eyes and open the cupboard door, count to 10 and hey presto 1 mouse who is as scared of you as you are of it will be gone when you open your eyes.
 
The gauge is showing a bar of pressure. Shouldn't need topping up. Must be something else, unless the gauge is fubbared.
 
Just looked again at your picture, is the 60 degree light flashing or constant, have you tried resetting it
 
The 60° lamp indicates low pressure as any fule kno.

It's either woman vs mouse or a cold house until hubby gets home.
 
I am sure the mouse is more scared than the woman, he has probably run upstairs and is hiding under her bed now :)
 
you got 3 choices

make a trade with the mouse cheese for 10 mins of its time
hammer time
or be cold until hub comes home
 
The gauge is showing a bar of pressure. Shouldn't need topping up. Must be something else, unless the gauge is fubbared.

open your eyes its 0.7 of a bar :D
 
so what about the 60 light giving low pressure, more likely the pressure gauge is furbared and the sensor is correct, needs topping up still...

anything below .8 is low pressure light on them
 
why only get one
I've had tweveral already and the Memsahib isn't overly impressed with my current sense of humour
I may retire to the (local 70yds up the road) and take my talents where they will be appreciated
 
I've had tweveral already and the Memsahib isn't overly impressed with my current sense of humour
I may retire to the (local 70yds up the road) and take my talents where they will be appreciated

whats the maid like?
 
Had a few where the pressure switch is particularly blocked and have to take to 1.5 to get working.
 
The knob is for hot water only, turn ccw towards rad+tap.
Still need topping up altough on some boilers hw works with as little as .5 bars pressure left.
Turn it off and back on it might work for 5 minutes before turning off again.
 
whats the maid like?
Still lush! unfortunately she's gone to bed
so Dean Martin for me on you tube again
He's my go to "when you're ****ed again"
Still trying to follow his somngs on my guitat that I cant play
EDIT
Or spell
 
Status
Not open for further replies.

Similar plumbing topics

Ignore that air pressure sensor 🤦‍♂️
Replies
5
Views
603
I once had a similar experience with my old...
Replies
6
Views
856
A
Thanks for that. And yes, time for an engineer!
Replies
2
Views
1K
Andy Don
A
I
I'm not an expert, but if your system is...
Replies
1
Views
1K
No taps or showers have been replaced. We did...
Replies
2
Views
1K
Back
Top