Glow worm betacom 28

[plumben]

We'll I started fitting my first glow worm betacom 28 Combi today,

Not everything went acording to plan brought my core drill and core cutters but no 110 transformer so had to give my SDs a good working

But got it on the wall and started laying my pipe work out and prepping for tomorrow,

Is there anything to look out for/good to know with these boilers?

Thanks

 

[plumben]

 

[ShaunCorbs]

one problem mate the boilers kinda of wonky ?

 

[plumben]

one problem mate the boilers kinda of wonky ?

View attachment 25411

Its spot on level my boiler I used and checked it with the laser level the outside wall has nice lean to it

 

[ShaunCorbs]

Its spot on level my boiler I used and checked it with the laser level the outside wall has nice lean to it

you sure

 

[plumben]

you sure

100% my stabila doesn't lie, and before you say the connection for the filling loop is wonky as its not soldered yet

 

[Billy Bob Bob]

We'll I started fitting my first glow worm betacom 28 Combi today,

Not everything went acording to plan brought my core drill and core cutters but no 110 transformer so had to give my SDs a good working

But got it on the wall and started laying my pipe work out and prepping for tomorrow,

Is there anything to look out for/good to know with these boilers?

Thanks

not a fan,not good boilers TBH

 

[ShaunCorbs]

100% my stabila doesn't lie, and before you say the connection for the filling loop is wonky as its not soldered yet

only yanking your chain but didnt notice the filling loop

 

[plumben]

only yanking your chain but didnt notice the filling loop

I shouldn't of said anything, the cold feed to the bathrooms lovely though, almost as good as the ISO on the gas,

 

[plumben]

not a fan,not good boilers TBH

Any main issues to watch out for?

Not my budget boiler choice usually got for a main eco elite

 

[ShaunCorbs]

thats a cracker of a dent, you replacing or leaving?

 

[plumben]

thats a cracker of a dent, you replacing or leaving?

Replacing, new hot and cold feeds to just below the ceiling then temp connections until I rip the kitchen out to get the damp course done, replaster the kitchen replace all the windows on the back of the house, new gutters and new electrics, all whilst the tenants living there, it's going to be fun

 

[Billy Bob Bob]

Any main issues to watch out for?

Not my budget boiler choice usually got for a main eco elite

not from new but lots of issues into the future,pcb,s prone to failing if powers off for one

 

[plumben]

not from new but lots of issues into the future,pcb,s prone to failing if powers off for one

Thanks, that's good to know as the house its in has terrible electrics all on extension leads

 

[ShaunCorbs]

Replacing, new hot and cold feeds to just below the ceiling then temp connections until I rip the kitchen out to get the damp course done, replaster the kitchen replace all the windows on the back of the house, new gutters and new electrics, all whilst the tenants living there, it's going to be fun

It is what about the socket half off under the boiler ?

 

[plumben]

It is what about the socket half off under the boiler ?

That's due to the cobbled together downpipe on the other side of the wall came off and all the rain water ran down the face and came in via the outside light and blew the electrics, spark said to leave it as is for a while to let the bricks dry out, it'll be going on properly before I've finished

 

[jtsplumbing]

Hope your keeping the yellow walls, Nice contrast with the white boiler !!

 

[plumben]

Hope your keeping the yellow walls, Nice contrast with the white boiler !!

Not my job to paint the walls, its only a store room though luckily