Glow worm cx 24 | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Glow worm cx 24 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
F

fatoftheland

We have just installed the above boiler in a customers house. They specified this boiler as they had a Glowworm already.

It should have been a 3 hour job, combi off, combi on.

The boiler comes with a jig to help pre plumbing. When the jig part is used the pipes are over 12mm away from the boiler.
The flue inner cover hits the boiler top. The bottom fixing screws are impossible to get at. The rear flue is a joke. The controls are rubbish. There is an electronic pressure guage so if you have an electrical fault you have no idea if there is water in the boiler.
It took 2 days to fit this boiler.
The aav is too low and nearly impossible to reach
Never Again.
Vaillant now own Glowworm so I expected a great product.
 
Status
Not open for further replies.

Similar plumbing topics

Hey John, Sorry getting back to you so late...
Replies
11
Views
2K
If you cannot set temperature on the boiler...
Replies
3
Views
16K
GerryS
G
A
  • Locked
thats fairly normal, like I said leave the...
Replies
5
Views
20K
lame plumber
L
C
  • Locked
yep the 4 connectors just push on to the...
Replies
3
Views
846
Hardy1
H
R
    • Like
  • Locked
decent product with excellent customer service...
Replies
11
Views
369
Back
Top