- Messages
- 138
customers CHB, cutting out on high flame setting after 20mins. Gas Pressure OK, Gas rate OK, Flame picture good but very high Co, its a water cooled burner and i have cleaned exchangers and condense today....can anyone help ?
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter archiedale
- Start date
- Replies 1
- Views 1K
Discuss Glow worm energysaver 50 in the Plumbing Jobs | The Job-board area at Plumbers Forums
Similar plumbing topics
Ignore that air pressure sensor 🤦♂️
- MethodPH
- Central Heating Forum
- 5
- 603
- Latest:
- MethodPH
I once had a similar experience with my old...
You could try jet flushing it with x400 or...
- billski
- Plumbing Jobs | The Job-board
- 9
- 204
- Latest:
- king of pipes
Conditions: nearly 10 year old boiler WB2B...
- Edelweiss
- Central Heating Forum
- 0
- 563
- Latest:
- Edelweiss