Glow Worm Fuelsaver | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Glow Worm Fuelsaver in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

shaky

Plumbers Arms member
Plumber
Gas Engineer
Messages
259
Went to do a land lord ticket today in sunny Dinas Powys south Wales and the readings I got were Ratio 1680 co was 2800 any one had readings like this on this boiler before.
 
Only on a glowworm energy saver with the worst burner in the world. Horrible water cooled thing, nightmare to change. Not nice boilers to work on at all.
 
Yeah, it just needs a good old strip service.
It's a copper/low water heat exchanger with very fine slots between the fins
 
yes it should,the high reading is telling you,gas pressures to high,restricted heat exchanger,or flue issues
 
Status
Not open for further replies.

Similar plumbing topics

Ignore that air pressure sensor 🤦‍♂️
Replies
5
Views
654
To risky replacing the gasket . They also have...
Replies
15
Views
2K
A
Thanks for that. And yes, time for an engineer!
Replies
2
Views
1K
Andy Don
A
I once had a similar experience with my old...
Replies
6
Views
954
    • Like
Ask the installer to get his supplier to...
Replies
5
Views
928
Back
Top