Glow.worm Hideaway 115C FF

[ed209]

bit of a long shot but if anyone comes across the above boiler Being replaced I need a cap for the vertical flue test point, it is not threaded , has been capped for approx 10 years with 22mm speedfit stop cap.
Or other suggestions, I can actually get a brass compression 22mm stop end with the olive to fit very well
But not manufacture approved fitting and customer worries it will be "at risked " by BG
again, as they are the ones that AR it recently.
Part discontinued by GW
boiler is in perfect condition apart from that BG obviously want to fit him a new one.

 

[ShaunCorbs]

I would accept a compression cap end if I came across it (as long as it fitted all the way and the olive fitted)

 

[quality]

Stick a compression on and tell BG to get stuffed

 

[Gasmk1]

it uses something like a push fit doesnt it thats all i have ever seen on them

 

[thereisawizza]

Bearing in mind it was probably BG who lost it in the 1st place.............