I have a glow worm ultimate 30ff boiler, install date approx 1995. On the PCB LED 4 doesnt light up, 1-3 are ok. I have fitted a new PCB and air pressure switch. There is no 240v to the second gas valve solenoid. The electrode sparks and the pilot lights up ok. Any ideas please?? thanks
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Glow worm ultimate boiler30ff not firing in the Boilers area at Plumbers Forums
Similar plumbing topics
I once had a similar experience with my old...
Did you check that the valve opens when the...
Hi - I found the fault. There are two actuator...
If the overheat thermostat has tripped, it...
