glow worm ultracom2 store 35 tripping on dhw. | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss glow worm ultracom2 store 35 tripping on dhw. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
68
Looking for some guidance please.
I have above boiler, its the 35 store, been in 6 years and now it trips out (at boiler reset on boiler) when calling for hot water, after about 4 or 5 miinutes run time. central heating no poblems, had heat exchanger replaced about 2 years ago and high temp thermistor or dhw side.
Any Ideas? have been told it could be plate heat exchanger but heating side ok, do have a combimate on supply pipework.
any advice greatly appreciated.
TIA
 
Wouldn't of thought the plate would cause the boiler to trip out

Any error codes ?
 

Similar plumbing topics

I once had a similar experience with my old...
Replies
6
Views
856
What water and heating setting for a Glow Worm...
Replies
0
Views
895
You could try jet flushing it with x400 or...
Replies
9
Views
204
A
Thanks for that. And yes, time for an engineer!
Replies
2
Views
1K
Andy Don
A
No taps or showers have been replaced. We did...
Replies
2
Views
1K
Back
Top