gloworm 30ff boiler | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss gloworm 30ff boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
A

adamshackleton

the pcb recently went on my boiler so refered to the manual for part code and picked one up from plumb centre,it was wrong!single fused,older manual with newer boiler,115 quid down the drain!as non returnable.anyway bought the two fuse one needed,looks different from old one but same wires as old one. fitted it to the boiler,wired the same as the old one,switched on,all lights on and boiler fired,heat and hot water....but.....when roomstat is down and heating control is off.....the boiler keeps lighting for aprox 1minute every 10 minutes and when controls are on and stat is turned up,the boiler stat seems to overide the roomstat. baffled.....please help
thanks Adam
 
Status
Not open for further replies.

Similar plumbing topics

"While zone 2 is running if I turn up the...
Replies
4
Views
676
All sorted now and running better than ever...
Replies
3
Views
1K
Thanks guys. Turned the valve and it fired up 👍
Replies
6
Views
1K
Anyway, you can always increase the boiler...
Replies
16
Views
1K
    • Like
Great summary and well done for getting it...
Replies
1
Views
2K
Back
Top