Glowworm 24 cxi | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Glowworm 24 cxi in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
K

kay-jay

Anyone familiar with these heaps?

Got one in a renter, lettings agency job.
Mysteriously fires up on heating without demand. Mind of its own. When its on you cant turn it off either.

Removed wiring from the programmer to rule that out and its still doing it so the issue is with the boiler.

Put a new pcb on about a year ago.
Cured it until this week then same again.

Are the pcbs really really wank and only last a year or is rhere an underlying issue causing the pcb to go haywire??


Cheers guys
 
be happy it works at all. if you have ruled out wiring up issue, is the diverter/microswitch
sticking half open and tap demand heating the rads
 
Status
Not open for further replies.

Similar plumbing topics

Yup! In its time it's had a main and secondary...
Replies
8
Views
2K
I just repeated this test. This time I got a...
Replies
6
Views
3K
  • Locked
I understand about the gas safety stuff and...
Replies
5
Views
2K
    • Like
From this post, I think you’ve got a good...
2
Replies
47
Views
6K
Thanks Chuck for the quick response I...
Replies
3
Views
1K
Back
Top