Glowworm 30 cxi no ch

[BillyHunt]

Called out to this, no display, absolutely nothing. Replaced pcb and user interface. Got display F9 showing. Fitted wter pressure sensor and filling loop. Hot water fine. No ch. Any ideas / solutions.

 

[diamondgas]

:welcome: to the forum BillyHunt ... You need to build up your posts and get into the GSR only forum before we can help you out with any fault only a GSR engineer should tackle ... In the meantime though, check external controls are calling for heat Sounds flippant but it can catch us all out, especially after the grief it sound like you've had

 

[Dotty]

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html