Glowworm 38cxi | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Glowworm 38cxi in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Destroyer2813

Plumbers Arms member
Plumber
Gas Engineer
Messages
3,401
Evening chaps

Mates text me this evening his cxi is cycling and flashing 8.8 whilst it does cycles , he said he had the power of earlier are the glowworm pcbs as fragile as the vallients to having the power turned off ?
 
I've changed half a dozen after power cuts and consumer changes. That kind of thing
 
I changed a pcb on a hxi last week, and they had a power cut so I take it that popped the pcb then. £194 for replacement, probably could have got it cheaper but got it from parts Center
 
Think I paid around that mark
 
you may pay £194, but the customer gets 20% more on top :)
 
you may pay £194, but the customer gets 20% more on top :)

If it was a private job then yes but this was one was insurance work, they give me 12% mark up automatically, and anything over £100 they usually request a copy of the invoice so can't add anything on myself
 
Status
Not open for further replies.

Similar plumbing topics

A
Hi all, I have a viessmann vitoden 100 w...
Replies
0
Views
644
Abbie S
A
Which model combi? Have you checked heating...
Replies
1
Views
775
W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
765
Is your boiler the 'Ideal Logic Heat 12' (i.e...
Replies
1
Views
890
I feel for you, it's a bad position to be in...
Replies
18
Views
3K
Back
Top