Hi. I hope someone can help. I have a glo worm combi boiler - previously had the heat plate cleaned and a magnetic sludge filter installed due to problem with no hot water.
For the last few weeks the boiler has been coming on when room stat is set to frost and temp is not below 5 degrees. All the rads come on - they are fitted with TRV's. We are having problems with no hot water - have to run the tap for a long time to get warm water. I have checked the filter and very little build up of sludge - the system has inhibitor in it.
I am wondering it it could be the diverter valve in the boiler which is causing the problem? As the boiler is quite old it may be worth investing in a new one? Any advice would be appreciated and recommendations for efficient new combi. I have 10 rads, 1 bathroom - 3 bed semi - good water pressure.
Cheers.
For the last few weeks the boiler has been coming on when room stat is set to frost and temp is not below 5 degrees. All the rads come on - they are fitted with TRV's. We are having problems with no hot water - have to run the tap for a long time to get warm water. I have checked the filter and very little build up of sludge - the system has inhibitor in it.
I am wondering it it could be the diverter valve in the boiler which is causing the problem? As the boiler is quite old it may be worth investing in a new one? Any advice would be appreciated and recommendations for efficient new combi. I have 10 rads, 1 bathroom - 3 bed semi - good water pressure.
Cheers.