Grant vortex combi probs | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Grant vortex combi probs in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Matt06

Gas Engineer
Messages
146
Hello,

Got a Grant Vortex eco 26 combi, 2007 Loses pressure . Vessel ok, no dripping out prv that I can see/feel

I noticed while I was filling the system when the filling links open boiler fires when I close it off burner stops ?

Any ideas theres a few valves dripping in the boiler casing which will change

Cheers
 
expn vssl charged??? wont drip once its blown off, prvs dont always drip all the time. prove that first, then check for leaks on system, then check for blown dhw hex
 
Thanks , theres some leaks with in the boiler casing low water pressure sensor, Isolation valve on return and the manual vents leaking (Dripping) which I need to sort.

I'm just confused why the burner only fires up when the filling loop is open and shuts off as soon as I shut the filling loop even though the system pressure is 1 bar +
 
needle was rising steadily etc while I was filling the system will order a new one just in case.
 
You also could check inside the burner chamber, back in the days when I used to work only with oil burners like buderus, weisshaupt , strebel, viessmann

It was rarely but sometimes the cast iron body had a very tiny hair cut which causes the water leaking into the chamber did you check if that's dry ?
 
ye pulled the burner out all dry bit dirty though don't think they ve had it serviced ever
 
ye pulled the burner out all dry bit dirty though don't think they ve had it serviced ever


If you give it a clean use a mask it's very unhealthy without ... The small particles you won't see but they are very dangerous.
 
The pressure loss is due to the combination of all the little leaks. Fix them before paying out for any other bits.

The reason the boiler fires when the filling valve is opened is that it is supplied from the demand side of the flow switch, so the boiler thinks you have opened a hot tap.
 
Thanks I sorted this

I was having a bit of a silly moment as to the boiler firing with the filling loop open
 
Status
Not open for further replies.

Similar plumbing topics

S
Boiler Fault I’m hoping someone can help with...
Replies
0
Views
114
S
Thought I would update this since folks took...
Replies
9
Views
4K
You need a new service engineer not a new...
Replies
3
Views
927
Replies
9
Views
936
Expansion vessel undersized, blocked flexi to...
Replies
1
Views
768
Back
Top