greenstar prv

[dazsl]

anyone no if you can take the prv out of a 28i junior without taking all the hydrolic block out

 

[jtsplumbing]

Yes remove boiler from wall,

 

[Ermintrude]

Yes just rove DCW and it's about 30 Mins. Probably take 2 or more attempts. Lube the o ring

 

[mfgs]

I just take the hydroblock out to be honest. I have done this a few times now for plates and PRV's and not had any issues with getting it to reaseal etc.

 

[bigads28]

I just take the hydroblock out to be honest. I have done this a few times now for plates and PRV's and not had any issues with getting it to reaseal etc.

This is how I do it too, that way you are sure it's in and all you need are a few bags of seals.

 

[Billy Bob Bob]

cut the cold main,more access then

 

[Ermintrude]

But if you cut cold all you need is a Yorkshire straight and its less Likley to leak

 

[dazsl]

Thanks for the ideas I just disconeted all the pipes then propped the bottom of the boiler away from the wall made it very easy to get too

 

[zeebeedee]

The hydro block is very easy to take out, after avoiding it for ages I've done 4 now and won't do it any other way again

 

[Pelsey]

Cold water pipe out the way and some long nose 90 deg pliers usually does it. You can get the plate out the same way too