greenstar

[ambrosia]

what does it mean when a worcester CDi25 is flashing SE, boiler seems to be working so i couldnt be bothered to read manual.
now i'm currious, is the boiler asking for a service, or sex, or holiday to the seychelles (cant think of anything else that starts with se, or indeed anything funny)

should worcester give there boilers 140 charactors to better express them selves, 2 is not enough

 

[ShaunCorbs]

trap fill normally about 15-30 mins then goes off (will only work at half rate)

you can disable in the menu somewhere but dont know where sorry

 

[ambrosia]

trap fill as in condense trap, are you saying the boiler thinks the condense trap is backing up

 

[ShaunCorbs]

trap fill as in condense trap, are you saying the boiler thinks the condense trap is backing up

yes and no it thinks its empty normally happens after a power cut / boiler turned off for a decent amount of time

 

[Deleted member 7121]

Hope this helps from the Worcester web site

The SE Code is not a fault, it is a function that is displayed when the boiler has run for 2324 hours, which is average for a 12 month period. And therefore is due for a Service.

 

[Deleted member 7121]

Hope this helps from the Worcester web site

The SE Code is not a fault, it is a function that is displayed when the boiler has run for 2324 hours, which is average for a 12 month period. And therefore is due for a Service.

 

[ShaunCorbs]

yes sorry am

thinking of the wrong symbol

 

[ShaunCorbs]

yes sorry am

thinking of the wrong symbol

 

[mfgs]

SE is just a service reminder. Cant remember how you reset it though, last time I had to call Worcester to talk me through it haha

 

[macackau]

It is a service symbol and for those talking about condensate mode, this is how you switch it off:

Hold spanner button
Use Eco button to scroll to 4F
Press chimney sweep for 1 second
Press Eco button to change to '0'
Press and hold chimney sweep button until double brackets like this appear []
Done!

 

[macackau]

It is a service symbol and for those talking about condensate mode, this is how you switch it off:

Hold spanner button
Use Eco button to scroll to 4F
Press chimney sweep for 1 second
Press Eco button to change to '0'
Press and hold chimney sweep button until double brackets like this appear []
Done!

 

[Gas74]

It is a service symbol and for those talking about condensate mode, this is how you switch it off:

Hold spanner button
Use Eco button to scroll to 4F
Press chimney sweep for 1 second
Press Eco button to change to '0'
Press and hold chimney sweep button until double brackets like this appear []
Done!

Not 4f it's 5a

 

[macackau]

Not 4f it's 5a

Deffo 4F. That's what's I've used and has worked for me.

 

[macackau]

Not 4f it's 5a

Deffo 4F. That's what's I've used and has worked for me.