Grohe Dahl Cistern | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Grohe Dahl Cistern in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
R

Richard

know this one sounds pathetic but. How do I get the chrome cistern access plate/flush button plate of the wall to get in to the cistern of a 5 year old grohe/dahl wall hung pan mount frame and cistern. I think you should push it in one direction etc but can't remember and Grohe web site is crap, like their equipment if you ask me. Just as an aside is it only me that thinks all this continental and expensive ceramic and brass ware is beautifully made and totally un-reliable junk. All those old British syphon flush loos and taps still work well 30 or 40 years later; even if you needed a ton of plumbers mate, ptfe, heldite to fit it.
Richard.
 
Status
Not open for further replies.

Similar plumbing topics

  • Locked
Interesting, as far as I'm aware the frame is...
2 3
Replies
54
Views
11K
  • Locked
Hello chaps (and any other chapesses on here)...
Replies
10
Views
8K
  • Locked
Yep, forgot about the under seat hinge type...
Replies
14
Views
2K
A
  • Locked
Oh! Thanks for that. Should make the job a...
Replies
10
Views
6K
Aidex
A
C
  • Locked
So when the 90 pan connector is removed you...
Replies
5
Views
4K
ConorM8350
C
Back
Top