Grohe shower very poor | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Grohe shower very poor in the Showers and Wetrooms Advice area at Plumbers Forums

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,156
Anyone fitted this pile of garbage all plastic ---t got to be the worst shower I have fitted and looks ugly as hell the performance is pony aswell grrr coustomers choice. Kop

20181214_170247.jpg
 
I fitted one (but built in) just before I packed up. Found that the 300mm dia head was sh1te. Turns out the 300mm delivered less than 250 (or might be 200). Swapped em over, at their expense, and was perfect.
Dispite what my wife says, bigger is not always better... :D
Read the data sheet and prepare to be amazed...
 
Upvote 0
Head has a restrictor in it.
Trouble is, most are now fixed at 18 lpm max. (that’s with 3bar working pressure ) so the large heads seem like they pass very little water.
 
Upvote 0
Have you seen the supply pipework for the head 10mm pex pipe google the install instructions ? very poor in my opinion for a usually solid company they need a 1/2" female BSP thread left inside the wall . Kop
 
Upvote 0

Similar plumbing topics

  • Question
You can do a few fairly simple tests. To test...
Replies
9
Views
747
  • Question
Thankyou for your advise and help
Replies
18
Views
3K
  • Question
I don't see your comments?
Replies
8
Views
816
  • Question
You say you have multiple showers. Have you...
Replies
5
Views
844
  • Question
Not designed for the trap upto you in the end...
Replies
3
Views
615
Back
Top