Grundfos Sololift 2 WC-1 not working | Bathroom Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Grundfos Sololift 2 WC-1 not working in the Bathroom Advice area at Plumbers Forums

Messages
1
I have a grundfos sololift 2 wc1 macerator that isn't working. It's about 3 years old. When the toilet flushes the bowl just fills up but the motor does not kick in. There is power going to the unit, The macerator motor/pump turns freely. I took the motor apart in the hope that there may be debris, but nothing preventative(Just hair wrapped around the spindle). The small trip switches are in the correct position. There is power coming from the large capacitor and from what i assume is the pressure switch

Any advice on getting it working would be most welcome.

Thank you
 

Attachments

  • 20220303_194758.mp4
    45.9 MB
Could the U-bend of the toilet pan be blocked and stopping water entering the pump or could the air vent be blocked off to stop any bad smells.
 
Just for the benefit of members on this forum, the issue has been tracked down to an electrical fault 😀
 

Similar plumbing topics

  • Question
Wow - ok - seems like nobody here is a fan of...
Replies
6
Views
3K
U
  • Locked
(d) Cold distribution pipe must be lower than...
2
Replies
34
Views
32K
Back
Top