Grundfoss Bronze pump | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Grundfoss Bronze pump in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Selectric?

It looks like it is 3 speed because it has a lable on it showing the different current usage ?? for 3 different settings

Ok, it's got a dial on the side which has 3 positions. Looks like it's this that does it, however, I can't see it, I can just feel it.

It's either on 1 or 3.

It's an underfloor heating circulation pump. It's the only pump on the system i.e. I don't have seperate pumps for each zone.

My Garden room takes a long time to heat up (screeded floor) is it worth upping the pump speed if it is on 1?

Or, just leave well alone?
 
Last edited by a moderator:
put it in the middle and you know it is defo on setting 2
See how it performs! If it is worse then the pump was obviously on 3 in the first place and you should return it to its previous position. If it is better then try upping it again to make it perform even better.......
 
put it in the middle and you know it is defo on setting 2
See how it performs! If it is worse then the pump was obviously on 3 in the first place and you should return it to its previous position. If it is better then try upping it again to make it perform even better.......

It was on 3... I'm trying it on 2 now, it's a lot quieter.

I'll see how it performs.
 
Status
Not open for further replies.

Similar plumbing topics

Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
837
  • Question
I have now.
Replies
1
Views
1K
Bronze Body DHW Recirc Pump Model : Bronze...
Replies
0
Views
612
    • Like
VIEW HERE Bronze Body DHW Recirc Pump Model...
Replies
0
Views
1K
Everything working fine on PP mode - thanks...
Replies
7
Views
1K
Back
Top