I’ve got a new build that’s approx 3 years old.
A couple of weeks ago the downstairs toilet started gurgling due to the water level in the bowl being low. I plunged it and that seemed to allow the water level to rise (although still not as high as I would expect).
Recently however I’ve started to have issues in the en-suite which is directly above the downstairs toilet.
The en-suite toilet is slow to flush away, the basin next to it is fine but the bath next along is also slow to drain.
When the bath drains the basin gurgles and initially bubbles were coming up in the toilet.
I’ve used chemicals and plunged everything and have found no obvious blockages yet.
I’ve also rodded both toilets and again found no blockages.
The toilet no longer bubbles but it’s still slow to drain and the basin still gurgles when emptying the bath.
The toilet bowl water level still rise and fall in time to me plunging the bath.
One other thing is that I’ve found the air stack in the loft space and removing the AAV cap seems to solve the issue.
I’ve got another bathroom at the other end of the house and that’s all OK.
Next step was to remove the sealant to get to the bath trap but before I did that I wondered if there was any guidance or advice someone more knowledgable than me would be able to give.
Thanks in advance.
A couple of weeks ago the downstairs toilet started gurgling due to the water level in the bowl being low. I plunged it and that seemed to allow the water level to rise (although still not as high as I would expect).
Recently however I’ve started to have issues in the en-suite which is directly above the downstairs toilet.
The en-suite toilet is slow to flush away, the basin next to it is fine but the bath next along is also slow to drain.
When the bath drains the basin gurgles and initially bubbles were coming up in the toilet.
I’ve used chemicals and plunged everything and have found no obvious blockages yet.
I’ve also rodded both toilets and again found no blockages.
The toilet no longer bubbles but it’s still slow to drain and the basin still gurgles when emptying the bath.
The toilet bowl water level still rise and fall in time to me plunging the bath.
One other thing is that I’ve found the air stack in the loft space and removing the AAV cap seems to solve the issue.
I’ve got another bathroom at the other end of the house and that’s all OK.
Next step was to remove the sealant to get to the bath trap but before I did that I wondered if there was any guidance or advice someone more knowledgable than me would be able to give.
Thanks in advance.