L
langen6
Operator code 52 - Internal fault (Instruction is to reset and retry)
Turn boiler off at mains and come up 60 Which is temp demand ,Then 13
which is present temp
Pump then runs and fan runs through cycle but as no flame is sensed
red fault light comes on and the following code is displayed
8.8 which I believe should be read as B.B. then 64 is displayed
followed by 01. Boiler then closes down
Suspect PCB to be faulty. Any advise greatfully recieved
Turn boiler off at mains and come up 60 Which is temp demand ,Then 13
which is present temp
Pump then runs and fan runs through cycle but as no flame is sensed
red fault light comes on and the following code is displayed
8.8 which I believe should be read as B.B. then 64 is displayed
followed by 01. Boiler then closes down
Suspect PCB to be faulty. Any advise greatfully recieved
Last edited by a moderator:
