Halsted Ace High- hot water problem | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Halsted Ace High- hot water problem in the Bathroom Advice area at Plumbers Forums

C

Chris H

Heating works fine, hot water works fine for about 3-4 minutes then burner goes off and then re lights within 60-90 seconds? System pressure is fine, have adjusted the temperature control and still does the same thing regardless of water temp. Any ideas?
 
if your an rgi this is a fairly simple cure normally, if your not gas registered call in someone who is as youll have to be replacing control/safety devices and this comes under rules of gas safety.
 

Similar plumbing topics

  • Question
That's not what I meant. Are the hot and cold...
Replies
6
Views
1K
  • Locked
I would suggest you contact gas safe to report...
Replies
3
Views
659
  • Question
I'm with Chuck, it may be the shower passing...
Replies
7
Views
2K
  • Question
That’s good, we’ll persevered! Let us know...
Replies
11
Views
1K
  • Question
Plate to plate Sorry to say gas engineers job
Replies
2
Views
906
Back
Top