hame made shower | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss hame made shower in the Showers and Wetrooms Advice area at Plumbers Forums

T

tiling spread

right here go's can I T off the hot/cold feeds on my bath run up the two pipes that will bee boxed in
use two straight chrome tapes drilled throw the wall
from the tapes elbow off too a T join in too one up the wall
then out with crome pipe work over head and fit a big shower head to it
 
shower.jpg
 
Upvote 0
all you going too see it the shiny crome pipe coming out the top with the shower head
even the crome taps will have crome collers round them too tart it up
thats all your see none of the pipe work from the bath
 
Upvote 0
It will be a pain having to finely adjust the taps to get the temperature right for showering. A mixer would be easier,a thermostatic one even better,but like the others have said,it's up to you.
 
Upvote 0
Prob will but if anyone turns the cold on anywhere else then ouch lol

It will work as above but if anyone asks who fitted it say it was there when you got the house:)

Buy a cheap manual mixer like [DLMURL="http://www.toolstation.com/shop/p32743"]Toolstation > Taps & Showers > Shower Valves > Revelle Modern Manual Shower Valve[/DLMURL]

or wait until lidls are doing them for £20
 
Last edited by a moderator:
Upvote 0

Similar plumbing topics

S
  • Question
If it was on a job of mine I would cut it out...
Replies
1
Views
700
S
  • Question
Take a look at that...
Replies
2
Views
751
P
    • Like
  • Question
Sometimes a few sharp taps with a spanner will...
Replies
4
Views
789
  • Question
Shaun answered you but I don’t know if it’s...
Replies
4
Views
1K
J
    • Like
  • Question
Hi, did you ever solve this problem? You...
Replies
1
Views
630
Back
Top