Heatre Sadia multipoint water heater

[Sedgy40]

Anything wrong with this?

 

[ShaunCorbs]

Yes a lot

Can list if you like

 

[Sedgy40]

Yes a lot

Can list if you like

Yes a lot

Can list if you like

went to change it today there's no drain off and it's heavy around 50ltrs in it

 

[ShaunCorbs]

went to change it today there's no drain off and it's heavy around 50ltrs in it

There never are with multi points

just have to grab it and flip it upside down

And would be around 25l

 

[Sedgy40]

There never are with multi points

just have to grab it and flip it upside down

And would be around 25l

It's 450mm of the floor under a worktop so can't get the grip on it properly as it's putting pressure on the pipe work that's isolated

 

[ShaunCorbs]

It's 450mm of the floor under a worktop so can't get the grip on it properly as it's putting pressure on the pipe work that's isolated

That's what your knees are for, undo from the comp nuts and roll it into your lap, and flip right way up (pipe at top)

Anything wrong with it (other than installation)

 

[Sedgy40]

went to change it today there's no drain off and it's heavy around 50ltrs in it

Yeh do a list lol

 

[ShaunCorbs]

Heater wrong way up
Not secured
No expansion vessel
D1 and d2 wrong
No tundish
No trap on waste pipe
Incoming cold piped to the hot outlet

 

[Sedgy40]

Heater wrong way up
Not secured
No expansion vessel
D1 and d2 wrong
No tundish
No trap on waste pipe
Incoming cold piped to the hot outlet

Yeh I thought the multipoint was a horizontal install
There is a expansion vessel just left of pic
Everything else spot on
Whoever installed it must have thought the waste can be used as a tun dish lol

 

[ShaunCorbs]

Yeh I thought the multipoint was a horizontal install
There is a expansion vessel just left of pic
Everything else spot on
Whoever installed it must have thought the waste can be used as a tun dish lol

Needs to be on the cold and after the prv