Help-hiding wastes on wall hung sanitory ware | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Help-hiding wastes on wall hung sanitory ware in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
L

lla

Please can someone help.

I want to hang a sink on an exterior wall using a semi pedestal or bottle trap. Can the waste be hidden in the wall or must a false wall be built out? If the latter, what is the minimum depth required as I want as little projection as possible? I also want the whole area to be tiled to give a clean look.

I would be very grateful for any comments. Thanks.
 
few options i would consider....

first is if u have tools to bore thru your wall then feed waste directly out, or hammer n chiz it (messy) aslong as ur soil pipe is within decent range to connect to then chase feeds up wall.

secondly, boxing in pipework behind basin and then tiling but this sounds as if it will be immpossible for maintainance if ur tiling over it unless ur gona enjoy tiling it again and again.

thirdly, building wall out far enough for your waste and feeds to be hiden behind and using offcut of kitchen work top to place on top as u will need access to pipes etc for maintainance.


few others i bet but nothing else i would do dont think

good luck

*confusious say, man who stands on toilet is high on pot*
 
Last edited by a moderator:
Thanks for advice. I should have said I'm not a plumber although I guess that is rather obvious from my questions! Anyway, I'll think about the options. Thanks again.
 
Status
Not open for further replies.

Similar plumbing topics

J
Soil pipe is 110mm in uk, geberit etc do make...
Replies
2
Views
3K
Thank you so much - really appreciate the...
Replies
6
Views
2K
  • Question
Hello, I'm a homeowner, not a DIYer. I have...
Replies
0
Views
730
I would use solvent weld elbow/pipe/elbow to...
Replies
12
Views
4K
Any of the cement faced extruded polystyrene...
Replies
18
Views
7K
Back
Top