Help identifying connector | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Help identifying connector in the UK Plumbers Forums area at Plumbers Forums

Messages
3
Hi,
One of the connectors I have for my water filter has snapped, well the screwbit has. I've been trying to contact the supplier but I'm assuming they're closed until the new year. If I can find out the name of this connector I'll just go to Screwfix and pick it up. I've attached the photos, this connector goes from the filtration cyclinder to the other filters.

Any help is welcome, thank you.
 

Attachments

  • IMG_20201229_193503.jpg
    IMG_20201229_193503.jpg
    168.9 KB · Views: 22
  • IMG_20201229_193521.jpg
    IMG_20201229_193521.jpg
    250.8 KB · Views: 20
  • IMG_20201229_193538.jpg
    IMG_20201229_193538.jpg
    206 KB · Views: 20
  • IMG_20201229_193550.jpg
    IMG_20201229_193550.jpg
    167.5 KB · Views: 20

Similar plumbing topics

  • Question
Yep as above Undo the nut slide to the right...
Replies
4
Views
1K
  • Question
does a standard tap refurb kit fit? they come...
Replies
1
Views
388
Well persevered, it is always worth the extra...
Replies
4
Views
1K
  • Question
Manufacturers hose tend to have the Wings...
Replies
3
Views
8K
  • Question
Success I ran the taps and checked the tank...
Replies
5
Views
1K
Back
Top