Help in identifying part / toilet | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Help in identifying part / toilet in the Boilers area at Plumbers Forums

Status
Not open for further replies.
B

bigeyes

Hi

I have searched high and low in my local merchants to find a replacement flush button for our toilet without success. Part of the problem is I cant remeber what make/design the toilet actually is (nothing on the toilet itself). Had a feeling it was Twyford but cant find anything similar.

Could you have a look to see if you could identify the broken part / toilet on the 2 photo's Toilet1.jpg Toilet.jpg


Many Thanks
 
check on the underside of the cistern lid, see if there are any markings
 
If its a round hole under there then most buttons will fit
 
Status
Not open for further replies.

Similar plumbing topics

Thank you mate, really appreciated that. I...
Replies
6
Views
488
Was the new pan fitted with a flexible waste...
Replies
1
Views
621
Hve you tried pulling the large chrome part...
Replies
2
Views
2K
did this replacement work, I am needing one myself
Replies
10
Views
5K
Jimbob576
J
Click through the pics on this site and they...
Replies
1
Views
1K
Back
Top