Help..New pump fitted, not pumping? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Help..New pump fitted, not pumping? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

bob-the-wrecker

Hello,need a bit of help here please. Mother in laws house had lay empty for a while and the roof of the shed where the boiler was had fell in. Every thing was soaked. New roof fitted and every thing dryed out so we turned the heating on...started up ok for a few minutes then knocked the power off. Turned out the pump was soaked and had died so fitted a new pump there today and started the boiler, away it went and the pump was spinning away but it didnt seem to be heating the radiators the after 15mins the boiler turned off (it was really warm) so whats up? Could the pipes be blocked? Or is it possible the pump is working back to front? The arrow is pointing the same way as the old one was? Thanks...Owen
 
is the pump circulating the water or is it air locked
has the system got enough water in ?
have you bled any of the system ?
 
Status
Not open for further replies.

Similar plumbing topics

    • Like
Alpha 2/3 manual. Shows variant with air...
Replies
8
Views
1K
A simple thing i'd probably check is the...
Replies
9
Views
1K
Several people told me it would be an Airlock...
Replies
4
Views
747
C
Hi all, all new to this breakdown life...
Replies
0
Views
1K
CJAY40
C
Builders innit, make'em pay.
Replies
1
Views
685
Back
Top